MEP BIM Services | Revit MEP Modeling Services

Our Revit MEP BIM Services is specialized in developing accurate and detailed MEP modeling with required LOD and as per the BIM execution plan. Develop mechanical, electrical, and plumbing systems models as per the defined spaces and zones in the building model.

MEP BIM Services

  • MEP 2D Drafting Services
  • MEP BIM Modeling Services
  • MEP Coordination Services
  • MEP Shop Drawings Creation
  • MEP Fabrication Drawings
  • MEP Content Revit Family Creation
  • MEP Quantity take-off and BOM
  • 4D Construction Scheduling
  • 5D Cost Estimation
DOWNLOAD BROCHURE
Revit MEP Modeling Services

We Develop Detailed & Accurate Revit MEPFS Model as per Design and Fabrication Needs

We create mechanical, electrical, and plumbing Revit models as per the design-intent and as required for each design phase – schematic design, design document and construction document.

We can also create custom Revit mechanical/electrical/plumbing families which are parametric and can have required LOD. We embed various levels of detailing into an MEP model (from LOD 100 to LOD 500), depending upon the stage of building design, from initial MEP design (schematic design) to design development to construction documents to fabrication to construction stage.

We add industry standards formulas into MEP Revit family parameters and connector parameters to do tedious calculation more accurate than manual computational. We add connector parameters into all MEP components to behave with intelligence and for multi-discipline coordination. We also consider: Where the information comes from? Where it’s going? What it will do when it gets there? How it can be used?

We aim to deliver a highly accurate and detailed 3D MEP model to MEP contractors, MEP consultants, construction firms, design-build firms, MEP component manufacturers to maximize efficiency to design optimization, detailing, quantity takeoff, fabrication, and installation of MEP building systems.

Our MEP BIM Services Include

Mechanical Systems

Model mechanical systems, such as HVAC duct system using tools to place air terminals and mechanical equipment in a project. Use automatic system creation tools to create duct routing layouts

Electrical Systems

Model electrical systems to place lighting fixtures, cable trays, and electrical equipment in a project with required LOD and annotation. Coordinate electrical models with other disciplines/trades if required.

Plumbing Systems

Model plumbing systems by placing plumbing components and assigning them to a supply or return system. Leverage layout tools to determine the best routing for the plumbing that connects the system components.

Fabrication & Shop-drawings

Develop LOD 400 content within Revit MEP models for the fabrication and installation process.

4D & 5D BIM

Provide a data-rich MEP 3D model for scheduling, cost estimation, quantity-takeoff, BOM.

MEP Content Creation

Create parametric modeling as well as library of MEP components – Mechanical, Electrical and Plumbing.

Trades of MEPFS Modeling

  • Mechanical System –HVAC Equipment and distribution such as Cooling tower, AHU, Ducting, etc.
  • Electrical System –Panels, switchboards, elevators, transformer, cable trays, etc.
  • Plumbing and Sanitary System –Pumps, water holding tanks, pool filtration equipment, Sump, sewage pit, grease and sand traps, etc
  • Fire Safety System – Fire sprinkler pumps, sprinkler tanks fire shutter, smoke curtains, piping system, etc.
  • Outside of Building – External works, rooftop, and external face of a building, etc.

Our MEP BIM Services Offering

With competency in MEPFS (Mechanical-Electrical-Plumbing-Fire-Sprinkler) design software’s such as Revit, Navisworks, FABmep allows us to offer quality BIM MEPFS services. We can integrate our services with the customer’s design process & workflow to deliver complete and coordinated MEPFS BIM models. As part of the services, we provide comprehensive analysis and reports to help customers further refine their design and the design process.

  1. 3D modeling and rendering for MEP layout
  2. MEP shop drawings, fabrication and spool drawings
  3. Quantity take-off and BOMs
  4. Scheduling (4D) & cost estimation (5D)
  5. MEP content creation for MEP components

Our MEPFP Coordination Process

01
Load MEP BIM Template

Load MEP BIM template based on the client’s standards for each of the listed trades: mechanical, electrical, plumbing & sanitary and fire protection.

02
Verify the Architectural Model

Verify/Check the coordinate of the Architectural model with MEP models by using “Origin to Origin” positioning approach before linking them.

03
Prepare the MEP Model

Prepare the MEP model for each of the disciplines – Mechanical, Electrical, Plumbing, and include all elements for coordination within the central file.

04
Run the Clash-detection

In Navisworks any two models are coordinated together and by clicking on “Run Test”, it shows the “Clash Report ” occurred between the coordinated model.

05
Review and Resolve Clashes

After resolving clashes, we reload the cache in the Navisworks and make sure resolved clashes are in yellow, and check if any new clashes which will show up in red.

MEP-Coordination-Workflow by United-BIM
MEP-Dashboard-for Gatekeeper Meeting by United-BIM

Benefits of Revit MEP Modeling Services

Our Autodesk’s Revit based BIM MEPFS services help engineers, designers, and contractors across the mechanical, electrical, plumbing, and fire-sprinkler (MEPFS) trades to coordinate and communicate design intent very effectively.

  • Accurate 3D MEP model with the coordinated disciplines
  • Clash-free MEP model by resolving hard and soft interdisciplinary clashes
  • Extend design to fabrication by including manufacturing-specific content
  • Facilitate bill of material, cost & quantity estimate process
  • Ease of modeling with standard specification and code compliance

Projects Delivered Through MEP BIM Modeling & Clash Coordination

Featured Projects

Let us Know Your MEP BIM Services Requirements